Anesthesia Workstation Model 30

• Built in 8” color LCD anaesthesia ventilator

• Traditional CO₂ absorber (autoclavable, Patent)

• Dual high end precise vaporizers (Volume > 280ml)

• Dual gas sources system (O₂/N₂O)

• Continuous FiO₂ monitoring & bain circuit interface

• Optional: Electronic tidal volume setting

• Optional: Anaesthesia gas modular patient monitor

• Optional: Anaesthesia gas scavenging system

• Optional: Yoke system & EtCO₂ monitoring function

• Optional: UPS battery backup system

Technical Specification

Anaesthesia main unit

• High resolution 8” color TFT LCD screen

• Built with airway pressure sensor, FiO₂ sensor & flow sensor. The unit can monitor:

  • Tidal volume, Respiratory frequency, I:E rate, Airway pressure, Pressure-time wave, Flow-time wave, High pressure limitation, Low pressure limitation, MV, Apnea, FiO₂, Oxygen concentration under both two operating modes (Auto, Manual)

• Close, semi-close, semi-open system, open (bain circuit)

• Application: Adult, Pediatric

• Low gas alarming: Low O₂ gas pressure, it will give alarm for more than 7 seconds.

• High pressure limitation: Whenever airway pressure exceeds the pre-set high pressure, the ventilator offers protection automatically to ensure airway pressure does not increase further, ensuring patient safety.

• Low pressure protection: Once O₂ pressure is less than 0.1 MPa, N₂O gas supply will stop automatically.

• Power failure alarming, power extendable function

• O₂ flush: 25 ~ 75L/min

• Gas pressure:

  • O₂: 0.3 ~ 0.5 MPa

  • N₂O: 0.3 ~ 0.5 MPa

• Power: 220V±10%, 50Hz±1%

Flow meter

• O₂/N₂O – double tubes (0.1 ~ 10 L/min)

• O₂/N₂O inter-lock system, to keep O₂ concentration no less than 25%